LS2 Based 402 Stroker Builds
SQP specialise in High Performance Race Engine Building. We are custom engine builders and pride ourselves on being able to match a package to our customers requirements. We buy direct from the World's best manufacturers so are able to control our quality from the outset to the final product. All our street base engine builds undergo the same maticulous preparation and build quality as out high end race motors. There is only one way to do the job at SQP and that is right way. All measuring is done in house using our Mitutoyo micrometers and gauges. This allows us to keep our clearances where WE know works for reliability. We don't just clean and assemble pre machined supplied parts. There is more to engine building than a flash assembly room. Ask to see this measuring equipment when choosing your builder BEFORE you get a job done. Why buy overseas built by someone you can't meet when you get the highest possible standards in your home town? All our engines are dummy assembled for deck height checking as this is a critical area to maintain equal compression ratios over all the cylinders. Make sure you are buying a blueprinted engine not one built from guesses.
The LS2 is a great platform to base your stroker build from. It offer good bang for the $$ value utilising the larger 4.00" bore and high flow intake manifold over the LS1. The injectors as fitted standard will support to 450rwhp. At SQP we base the build off a Callies Compstar 4340 crankshaft with Compstar H beam conrods. We torque plate hone the block to the first available oversize to true the bores for ovality and taper. Some other companies offer 408 packages but this requires taking the block to the max oversize and leaves nothing for future freshens. We typically don't cam our stroker build overly aggressive as the point of the build in low to mid range power. Big cams negate the strong midrange that us V8 owners love.
With many years of LS experience we have a combo to suit all requirements from mild to wild. WE CAN BUILD YOUR ENGINE OR SUPPLY AS A CRATE ENGINE FOR UPGRADING EARLIER MODELS.
Our entry level build is as follows and can be expanded from this base to your requirements;
- Callies Compstar Crank and Conrods.
- JE SRP Professional Forged Pistons and Rings.
- Clevite Race Series Conrod and Mains bearings.
- Rollmaster double row timing set with German JWIS chain.
- Comp Cams SQP Custom Camshaft to suit application.
- GM LS7 Hi rpm lifters.
- RHS 225cc Pro cylinder heads Assemblies with dual springs.
- Trend 4340 CrMo .080" wall pushrods.
- Blueprinted OEM oil pump and modified oil system.
- FelPro Conversion Gasket set with front and rear main seals.
- Genuine GM MLS head gaskets.
- ARP head bolts.
- Revised chain guide.
- Torque Plate Diamond Hone.
- Square Deck to correct deck height.
- Align hone of the main bearing tunnel.
- Crank Polish and detail.
- Rotating Assembly balanced to under 2 grams.
- Full block detail and chemical clean.
- Clearancing for stroker.
- Full measure and Professional Assembly.
- Powerbond SFI harmonic balancer and belts as optional extra.
- SQP highly recommend upgrading to roller rockers on the above build.
The above build as a drive in/out package on a LS2 based HSV inluding remove and replace, Lucas Oil, oil filter, Dexcool coolant, NGK spark plugs and full mafless tune with dyno time is available from;
PRICE ON APPLICATION
PLEASE EMAIL OR CALL FOR MORE DETAILS.
MANY MORE COMBOS AVAILABLE.
ALSO AVAILABLE AS OUTRIGHT PURCHASE.
